Convey environment setup

copy the two files to your home directory: Xilinx_11.1_src and setcnyenv.txt. They contain the following:
setcnyenv.txt:

#General envs to setup
export CNY_PDK=/opt/convey/pdk
export CNY_PDK_REV=2010_08_09
export CNY_PDK_HDLSIM=Mentor
export CNY_PDK_SIMMODE=64

# For running SW model or Modelsim
# export CNY_SIM_THREAD=libcpSimLib2.so

# For running on HW
export CNY_SIM_THREAD=

# for software emulation
# export CNY_CAE_EMULATOR=<loction of CaeSimPers>
# Example location ~/temp_sample_app/cae_pers_vadd/CaeSimPers/CaeSimPers

# for Modelsim simulation
#export CNY_CAE_EMULATOR=./run_simulation

#for running on HW
export CNY_CAE_EMULATOR=

Xilinx_11.1_src:

echo Make sure you are using a bash shell before sourcing this file.
echo You can type, bash, if you are not
echo I recommend setting bash as your default shell

source /remote/Xilinx/11.1/settings64.sh
export PATH=$PATH:/remote/Modelsim/6.4b/modeltech/linux_x86_64/
export LM_LICENSE_FILE=1717@io.ece.iastate.edu:27006@io.ece.iastate.edu

adding the following lines to your .bashrc file will prevent you from having to source these files every time you login
.bashrc:

# .bashrc

# Source global definitions
if [ -f /etc/bashrc ]; then
 . /etc/bashrc
fi

# User specific aliases and functions
# setup convey aliases
source setcnyenv.txt
source Xilinx_11.1_src