Corner Simulations using ADE XL

Corner Simulations using ADE XL

• Select Launch tab in the schematic.
  • Select ADE XL.

• • Select Create New View and then OK.

• Once you have created a new ADE XL window view, go to the Data View window and select Tests.
  • Clcik Add Test.
  • Setup the tests, model files, variables and outputs in the ADE L window.
  • Added tests (etc.) should appear under Tests in Data View window.
• In the Data View window, select Corners.
  • Click Add Corner.

• • Click Add Model File.
    • Click Import from Test.
    • Add other model files if needed.
  • Click Add new corner.
    • Click section and set the desired corner for the model files.
    • Rename the added test to match corner simulation (Optional).
  • Repeat the above for all corner tests.
  • Click OK.

• • Added corners should appear under Corners in Data View window.
• Run the simulation.
• To plot the results:
  • Right click on graph symbol corresponding to the parameter you wish to plot.
  • Select Plot Across Corners.