Corner Simulations using ADE XL

Select Launch tab in the schematic.
- Select ADE XL.
- Select Create New View and then OK.
Once you have created a new ADE XL window view, click on Options->Display and change the X Snap Spacing and the Y Snap Spacing to the minimum spacing required by your fabrication process.
You must first instantiate ports at both the input and output of the LNA (analogLib -> Sources -> Independent -> port).
Edit the properties of the input port
- Set the Resistance to 50 Ω and the Port number to 1.
- Set the Source type to dc.
Edit the properties of the output port
- Set the Resistance to 50 Ω and set the Port number to 2.
- Set the Source type to dc.

Navigation menu