Integrated Inductor Design using ADS Momentum

From VLSI
Jump to navigation Jump to search

A common passive component in RFIC design is the integrated inductor and designers are commonly interested in the total inductance as well as the quality factor, or Q. In this tutorial you will learn how to take the layout of an inductor that was generated using Cadence and import it into ADS Momentum where you can find the inductance and Q values for that particular layout. This tutorial can also be adapted to designing integrated transformers where one is also interested in the coupling factor, k.

It is assumed that the reader is familiar with the basic operation of Cadence and the basic operation of ADS.

Inductor Layout

  • Begin by starting Cadence and creating a new layout cell view for the inductor. It is important that each inductor be given its own cell view because we will later be generating a time-domain model for using in future Cadence simulations and this model will be specific to a particular layout.
  • Once you have created the new layout view, click on Options -> Display and change the X Snap Spacing and the Y Snap Spacing to the minimum spacing required by your fabrication process.
    • If you are using a Cadence Process Design Kit (PDK) this setting is likely to be set by default.
  • Create the inductor layout making sure that it is DRC clean
    • If you instance a parameterized cell (p-cell) inductor, then you should flatten the layout by selecting Edit -> Hierarchy -> Flatten and then delete everything but the drawing layers from the design.

Exporting Layout to ADS

We will now export the inductor layout to a *.gds file in preparation for simulation and modeling of the inductor in ADS Momentum.

  • In the Cadence CIW window click File -> Export -> Stream this brings up the Stream Out window.
    • Enter the name of the exported gds file. The file should have an extension '.gds' in the Stream File field.
    • Enter the technology library name in Technology Library
    • Enter the name of the Library where the indcutor cell view is located in the Library field
    • In Toplevel Cell(s) enter the name of the cell view containing the inductor layout
    • In the View field enter the view name of the inductor layout (e.g., layout)
  • Select Options and then the Layers tab
    • Click on Load File and load the layer mapping file (if you have one). This file maps the cadence layers to gds layers and will have an extension of *.map and may be called something like cds2gds.map. If you are using a PDK this file will often be included in the PDK files. You can also use Automatic Mapping if no mapping file exists.
    • Click OK
  • In the Stream Out window click translate
Retrieved from "https://wikis.ece.iastate.edu/vlsi/index.php?title=Integrated_Inductor_Design_using_ADS_Momentum&oldid=133"