VCO Performance Simulations: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 6: | Line 6: | ||
**In the "Fundamental Tones" section make sure "Beat Frequency" is selected and enter your best guess as to what the frequency of oscillation should be (i.e., enter your desired operating frequency). Make sure that "Auto Calculate" is NOT selected. | **In the "Fundamental Tones" section make sure "Beat Frequency" is selected and enter your best guess as to what the frequency of oscillation should be (i.e., enter your desired operating frequency). Make sure that "Auto Calculate" is NOT selected. | ||
**In "Output harmonics" select "Number of harmonics" and enter 10. | **In "Output harmonics" select "Number of harmonics" and enter 10. | ||
**Under "Accuracy Defaults (errpreset)" select "conservative" and enter the required stabilization time under "Additional Time for Stabilization (tstab)" | **Under "Accuracy Defaults (errpreset)" select "conservative" and enter the required stabilization time under "Additional Time for Stabilization (tstab)". | ||
***tstab is obtained from a transient simulation. It is the time that it takes for the output of your oscillator to settle to a steady state (in terms of amplitude and frequency). | ***tstab is obtained from a transient simulation. It is the time that it takes for the output of your oscillator to settle to a steady state (in terms of amplitude and frequency). | ||
**Select "Oscillator" and then select one differential output for "Oscillator node" and the other differential output for the "Reference node". | |||
**Click "Apply" | |||
*Nose select "pnoise" analysis in the "Choosing Analysis" window | |||
Revision as of 15:53, 17 March 2010
The following tutorial assumes that you have a voltage controlled oscillator (VCO) already designed and you now wish to find various performance criteria such as phase noise, tuning range, etc.
Phase Noise
- Make sure that your tuning voltage is set such that your VCO oscillates at the desired frequency.
- From the Analog Design Environment click "Choose Analysis ..." and choose "pss"
- In the "Fundamental Tones" section make sure "Beat Frequency" is selected and enter your best guess as to what the frequency of oscillation should be (i.e., enter your desired operating frequency). Make sure that "Auto Calculate" is NOT selected.
- In "Output harmonics" select "Number of harmonics" and enter 10.
- Under "Accuracy Defaults (errpreset)" select "conservative" and enter the required stabilization time under "Additional Time for Stabilization (tstab)".
- tstab is obtained from a transient simulation. It is the time that it takes for the output of your oscillator to settle to a steady state (in terms of amplitude and frequency).
- Select "Oscillator" and then select one differential output for "Oscillator node" and the other differential output for the "Reference node".
- Click "Apply"
- Nose select "pnoise" analysis in the "Choosing Analysis" window