Simulations using ADE (G)XL: Difference between revisions

From VLSI
Jump to navigation Jump to search
Xhyu (talk | contribs)
Xhyu (talk | contribs)
Line 4: Line 4:


==Parameter sweeping==
==Parameter sweeping==
*Create a parameter sweeping in ADE L
*Option 1
*Save the setup to an .il file
**Double click the parameter value
*Load the parameter sweeping setup in ADE (G)XL
**Click the button on the right of the value
*Run the simulation
**Run simulation
 
*Option 2
**Setup the parameter sweep in ADE L
**Save the setup to an .il file
**Load the saved .il file into ADE (G)XL parameter setup
**Run simulation


==[[Corner Simulations using ADE XL]]==
==[[Corner Simulations using ADE XL]]==

Revision as of 18:01, 8 August 2012

Simulations using ADE (G)XL

  • Create a ADE (G)XL
  • Create a Test using schematic view (Schematic view can be only used for schematic simulation. It is highly recommended to create a test using config view, which can be conveniently used for both schematic and postlayout simulation).

Parameter sweeping

  • Option 1
    • Double click the parameter value
    • Click the button on the right of the value
    • Run simulation
  • Option 2
    • Setup the parameter sweep in ADE L
    • Save the setup to an .il file
    • Load the saved .il file into ADE (G)XL parameter setup
    • Run simulation

Corner Simulations using ADE XL

Postlayout simulation

  • Create a config view
  • Create a test in ADE (G)XL using config view
  • Setup the simulation configurations (or, you can setup the simulation configurations for config view in ADE L and save the state. Load the saved state).
  • Setup the extract view: parasitics>setup>choose the cell to setup its schematic, estimated, an extracted view
  • Run the simulation
    • No parasitic: schematic simulation
    • Extracted: postlayout simulation

(under construction)