Corner Simulations using ADE XL: Difference between revisions
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
*In the <code>Data View</code> window, select '''Corners'''. | *In the <code>Data View</code> window, select '''Corners'''. | ||
**Click '''Add Corner'''. | **Click '''Add Corner'''. | ||
**Click '''Add Model File'''. | **Click '''Add Model File'''. | ||
***Click '''Import from Test'''. | ***Click '''Import from Test'''. | ||
Revision as of 17:05, 12 July 2012
Corner Simulations using ADE XL
- Select Launch tab in the schematic.
- Select ADE XL.
- Select Create New View and then OK.
- Once you have created a new ADE XL window view, go to the
Data Viewwindow and select Tests.- Clcik Add Test.
- Setup the tests, model files, variables and outputs in the ADE L window.
- Added tests (etc.) should appear under Tests in
Data Viewwindow.
- In the
Data Viewwindow, select Corners.- Click Add Corner.
- Click Add Model File.
- Click Import from Test.
- Add other model files if needed.
- Click Add new corner.
- Click section and set the desired corner for the model files.
- Rename the added test to match corner simulation (Optional).
- Repeat the above for all corner tests.
- Click OK.
- Added corners should appear under Corners in
Data Viewwindow.
- Added corners should appear under Corners in
- Run the simulation.
- To plot the results:
- Right click on graph symbol corresponding to the parameter you wish to plot.
- Select Plot Across Corners.
