Corner Simulations using ADE XL: Difference between revisions

Revision as of 16:46, 12 July 2012

Select Launch tab in the schematic.
- Select ADE XL.
- Select Create New View and then OK.

Once you have created a new ADE XL window view, go to the Data View window and select Tests.
- Clcik Add Test.
- Setup the tests, model files, variables and outputs in the ADE L window.
- Added tests (etc.) should appear under Corners in Data View window.
In the Data View window, select Corners.
- Click Add Corner.
- Click Add Model File.
  - Click Import from Test.
  - Add other model files if needed.
- Click Add new corner.
  - Set the desired corner for the model files.
  - Rename the added test to match corner simulation (Optional).
- Repeat the above for all corner tests.
- Click OK.
- Added corners should appear under Corners in Data View window.
Run the simulation.
To plot the results:
- Right click on graph symbol corresponding to the parameter you wish to plot.
- Select Plot Across Corners.

@@ Line 2: / Line 2: @@
 *Select '''Launch''' tab in the schematic.
 **Select '''ADE XL'''.
 **Select '''Create New View''' and then '''OK'''.
+[[Image:ADS_ind_design_inductor.png|center|border]]
 *Once you have created a new ADE XL window view, go to the <code>Data View</code> window and select '''Tests'''.
 **Clcik '''Add Test'''.