Corner Simulations using ADE XL: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
**Select '''ADE XL'''. | **Select '''ADE XL'''. | ||
**Select '''Create New View''' and then '''OK'''. | **Select '''Create New View''' and then '''OK'''. | ||
*Once you have created a new ADE XL window view, | *Once you have created a new ADE XL window view, go to the <code>Data View</code> and select '''Tests'''. | ||
**Select '''ADE XL'''. | |||
**Select '''Create New View''' and then '''OK'''. | |||
*You must first instantiate ports at both the input and output of the LNA '''(analogLib -> Sources -> Independent -> port)'''. | *You must first instantiate ports at both the input and output of the LNA '''(analogLib -> Sources -> Independent -> port)'''. | ||
*Edit the properties of the input port | *Edit the properties of the input port | ||
Revision as of 16:28, 12 July 2012
Corner Simulations using ADE XL
- Select Launch tab in the schematic.
- Select ADE XL.
- Select Create New View and then OK.
- Once you have created a new ADE XL window view, go to the
Data Viewand select Tests.- Select ADE XL.
- Select Create New View and then OK.
- You must first instantiate ports at both the input and output of the LNA (analogLib -> Sources -> Independent -> port).
- Edit the properties of the input port
- Set the Resistance to 50 Ω and the Port number to 1.
- Set the Source type to dc.
- Edit the properties of the output port
- Set the Resistance to 50 Ω and set the Port number to 2.
- Set the Source type to dc.