Corner Simulations using ADE XL: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==Corner Simulations using ADE XL== | ==Corner Simulations using ADE XL== | ||
*Select '''Launch''' tab in the schematic and | *Select '''Launch''' tab in the schematic and then select '''ADE XL'''. | ||
*Once you have created | **Select the '''Create New View''' and then '''OK'''. | ||
*Once you have created a new ADE XL window view, click on <code>Options->Display</code> and change the '''X Snap Spacing''' and the '''Y Snap Spacing''' to the minimum spacing required by your fabrication process. | |||
*You must first instantiate ports at both the input and output of the LNA '''(analogLib -> Sources -> Independent -> port)'''. | *You must first instantiate ports at both the input and output of the LNA '''(analogLib -> Sources -> Independent -> port)'''. | ||
*Edit the properties of the input port | *Edit the properties of the input port | ||
Revision as of 16:22, 12 July 2012
Corner Simulations using ADE XL
- Select Launch tab in the schematic and then select ADE XL.
- Select the Create New View and then OK.
- Once you have created a new ADE XL window view, click on
Options->Displayand change the X Snap Spacing and the Y Snap Spacing to the minimum spacing required by your fabrication process. - You must first instantiate ports at both the input and output of the LNA (analogLib -> Sources -> Independent -> port).
- Edit the properties of the input port
- Set the Resistance to 50 Ω and the Port number to 1.
- Set the Source type to dc.
- Edit the properties of the output port
- Set the Resistance to 50 Ω and set the Port number to 2.
- Set the Source type to dc.