Corner Simulations using ADE XL: Difference between revisions
Jump to navigation
Jump to search
| (One intermediate revision by one other user not shown) | |||
| Line 18: | Line 18: | ||
**Repeat the above for all corner tests. | **Repeat the above for all corner tests. | ||
**Click '''OK'''. | **Click '''OK'''. | ||
**Added corners should appear under '''Corners''' in <code>Data View</code> window. | |||
[[Image:Corner Setup2.png|center|border]] | [[Image:Corner Setup2.png|center|border]] | ||
Note: '''You need to select the models that you are going to use by checking the corresponding box in the column of the corner. | |||
''' | |||
*Run the simulation. | *Run the simulation. | ||
*To plot the results: | *To plot the results: | ||
Latest revision as of 20:25, 12 July 2012
Corner Simulations using ADE XL
- Select Launch tab in the schematic.
- Select ADE XL.
- Select Create New View and then OK.
- Once you have created a new ADE XL window view, go to the
Data Viewwindow and select Tests.- Clcik Add Test.
- Setup the tests, model files, variables and outputs in the ADE L window.
- Added tests (etc.) should appear under Tests in
Data Viewwindow.
- In the
Data Viewwindow, select Corners.- Click Add Corner.
- Click Add Model File.
- Click Import from Test.
- Add other model files if needed.
- Click Add new corner.
- Click section and set the desired corner for the model files.
- Rename the added test to match corner simulation (Optional).
- Repeat the above for all corner tests.
- Click OK.
- Added corners should appear under Corners in
Data Viewwindow.
Note: You need to select the models that you are going to use by checking the corresponding box in the column of the corner.
- Run the simulation.
- To plot the results:
- Right click on graph symbol corresponding to the parameter you wish to plot.
- Select Plot Across Corners.
