Corner Simulations using ADE XL: Difference between revisions

From VLSI
Jump to navigation Jump to search
← Older edit
Jeremyb (talk | contribs)
74 edits
Xhyu (talk | contribs)
75 edits
 
(6 intermediate revisions by one other user not shown)
Line 1: Line 1:
==Corner Simulations using ADE XL==
==Corner Simulations using ADE XL==
*Select '''Launch''' tab in the schematic.
*Select '''Launch''' tab in the schematic.
**Select '''ADE XL'''. [[Image:ADE XL.png|center|border]]
**Select '''ADE XL'''.
**Select '''Create New View''' and then '''OK'''.
**Select '''Create New View''' and then '''OK'''.
[[Image:ADE XL window.png|center|border]]
[[Image:ADE XL window.png|center|border]]
Line 8: Line 8:
**Setup the tests, model files, variables and outputs in the ADE L window.
**Setup the tests, model files, variables and outputs in the ADE L window.
**Added tests (etc.) should appear under '''Tests''' in <code>Data View</code> window.
**Added tests (etc.) should appear under '''Tests''' in <code>Data View</code> window.
[[Image:Add Tests.png|center|border]]
*In the <code>Data View</code> window, select '''Corners'''.
*In the <code>Data View</code> window, select '''Corners'''.
**Click '''Add Corner'''.
**Click '''Add Corner'''.
[[Image:Add Corners.png|center|border]]
**Click '''Add Model File'''.
**Click '''Add Model File'''.
***Click '''Import from Test'''.
***Click '''Import from Test'''.
***Add other model files if needed.
***Add other model files if needed.
**Click '''Add new corner'''. [[Image:Add Corner.png|center|border]]
**Click '''Add new corner'''.
***Click '''section''' and set the desired corner for the model files.
***Click '''section''' and set the desired corner for the model files.
***Rename the added test to match corner simulation (Optional).
***Rename the added test to match corner simulation (Optional).
**Repeat the above for all corner tests.
**Repeat the above for all corner tests.
**Click '''OK'''.
**Click '''OK'''.
[[Image:Corner Setup.png|center|border]]
**Added corners should appear under '''Corners''' in <code>Data View</code> window.
**Added corners should appear under '''Corners''' in <code>Data View</code> window.
[[Image:Corner Setup2.png|center|border]]
Note: '''You need to select the models that you are going to use by checking the corresponding box in the column of the corner.
'''
*Run the simulation.
*Run the simulation.
*To plot the results:
*To plot the results:

Latest revision as of 20:25, 12 July 2012

Corner Simulations using ADE XL

  • Select Launch tab in the schematic.
    • Select ADE XL.
    • Select Create New View and then OK.
  • Once you have created a new ADE XL window view, go to the Data View window and select Tests.
    • Clcik Add Test.
    • Setup the tests, model files, variables and outputs in the ADE L window.
    • Added tests (etc.) should appear under Tests in Data View window.
  • In the Data View window, select Corners.
    • Click Add Corner.
    • Click Add Model File.
      • Click Import from Test.
      • Add other model files if needed.
    • Click Add new corner.
      • Click section and set the desired corner for the model files.
      • Rename the added test to match corner simulation (Optional).
    • Repeat the above for all corner tests.
    • Click OK.
    • Added corners should appear under Corners in Data View window.

Note: You need to select the models that you are going to use by checking the corresponding box in the column of the corner.

  • Run the simulation.
  • To plot the results:
    • Right click on graph symbol corresponding to the parameter you wish to plot.
    • Select Plot Across Corners.
Retrieved from "https://wikis.ece.iastate.edu/vlsi/index.php?title=Corner_Simulations_using_ADE_XL&oldid=444"