View source for Corner Simulations using ADE XL

==Corner Simulations using ADE XL==
*Select '''Launch''' tab in the schematic.
**Select '''ADE XL'''.
[[Image:ADE XL.png|center|border]]
**Select '''Create New View''' and then '''OK'''.
[[Image:ADE XL window.png|center|border]]
*Once you have created a new ADE XL window view, go to the <code>Data View</code> window and select '''Tests'''.
**Clcik '''Add Test'''. 
**Setup the tests, model files, variables and outputs in the ADE L window.
**Added tests (etc.) should appear under '''Tests''' in <code>Data View</code> window.
[[Image:Add Tests.png|center|border]]
*In the <code>Data View</code> window, select '''Corners'''.
**Click '''Add Corner'''.
[[Image:Add Corners.png|center|border]]
**Click '''Add Model File'''.
***Click '''Import from Test'''.
***Add other model files if needed.
**Click '''Add new corner'''. [[Image:Add Corner.png|center|border]]
***Click '''section''' and set the desired corner for the model files.
***Rename the added test to match corner simulation (Optional).
**Repeat the above for all corner tests.
**Click '''OK'''.
[[Image:Corner Setup.png|center|border]]
**Added corners should appear under '''Corners''' in <code>Data View</code> window.
*Run the simulation.
*To plot the results:
**Right click on graph symbol corresponding to the parameter you wish to plot.
**Select '''Plot Across Corners'''.
[[Image:Plot_Across_Corners.png|center|border]]