Team Gryffindor

Team Gryffindor

Error creating thumbnail: File missing
Gryffindor Team Logo
Team Members Chad Nelson - cnel711 Mihir Awatramani - mihir Mengduo Ma - marinama Kuan-Hsing Ho - pm429015

Connecting to the Convey HC-1 Machine

1. Download and install NX Client.
2. Connect to convey-1.ece.iastate.edu using your ISU NetID and the password yournetid@123.
3. Change your password by opening a terminal window and running the passwd command.

NX Tip: Use GNOME as your windowing environment (for speed), and if you have trouble connecting, make sure you unselect the decrypt all traffic.

You can access the shared /home/cpre584_t2 folder by using the su cpre584_t2 command and entering our team password.
Alternatively, you can access the two files Jone's created for us on the shared folders here on the wiki:

1. Setup your Convey environmental variables (Jone's Script)
2. Here's a copy of the Xilinx 11.1 src file:

source /remote/Xilinx/11.1/settings64.sh
export PATH=$PATH:/remote/Modelsim/6.4b/modeltech/linux_x86_64/
export LM_LICENSE_FILE=1717@io.ece.iastate.edu:27006@io.ece.iastate.edu

Convey architecture overview

-> ppt goes here

Vector Adder Example

-> ppt goes here

Running the Sample Program using the Fabric

Section 10.5 of PDK Reference Manual explains how to run the sample software application. It has been reproduced below in brief.

The rev version installed on the Convey machine is from 2010-8-9; to copy the sample app's source code run:

cd ~
mkdir pdk_sample
cp -r /opt/convey/pdk/2010_08_09/cae_pers_vadd pdk_sample
cp -r /opt/convey/pdk/2010_08_09/pdk_apps/SampleAppVadd pdk_sample

To make the sample project.

cd ~/pdk_sample/cae_pers_vadd/CaeSimPers/
make
cd ~/pdk_sample/SampleAppVadd/
make

This compiles both an emulator (CaeSimPers) and a C program that makes a coprocessor call to use the vector adder (UserApp.exe). You'll want to make sure that you haven't set your environmental variables. You can do this by simply using a new terminal window or by running export CNY_SIM_THREAD=. To run the sample application on the coprocessor fabric, you'll need to make sure the CNY_SIM_THREAD environment variable is unset or 0. To run the software version of the app:

cd ~/pdk_sample/SampleAppVadd/
./UserApp.exe

You should see the program run and output the following:

You can also set the CNY_CALL_STATS environment variable; this variable gives back the number of times the coprocessor was called. I.E. for this application, the coprocessor is called once. Output from the terminal is reproduced in the following file:

Console Output

Running in the SW Model

To run the sample application on the Coprocessor simulator, you'll need to set some environmental variables:

# Use the Coprocessor Simulator
export CNY_SIM_THREAD=libcpSimLib2.so
# Point to the emulator
export CNY_CAE_EMULATOR=~/pdk_sample/cae_pers_vadd/CaeSimPers/CaeSimPers

After setting the environmental variables, rerun the app:

cd ~/pdk_sample/SampleAppVadd/
./UserApp.exe

The program will pause at the following screen for a 10-20 seconds...

...and then finish running the program.

Assignment 2

Sobel edge detection algorithm code with C :