Team 142875: Difference between revisions

From Cpre584
Jump to navigation Jump to search
Jmpark00 (talk | contribs)
No edit summary
Jmpark00 (talk | contribs)
 
(31 intermediate revisions by the same user not shown)
Line 6: Line 6:
== Assignment 1 ==
== Assignment 1 ==


=== Running the Sample Application [] ===
=== Developing a Custom Personality ===
# Copy Sample AE and Sample Application
1 Analyze Application
* The Vadd sample personality and application is installed with the PDK RPM in /opt/convey/pdk/2010_08_09/.
* How does the current application perform on existing hardware?
* The sample is made up of two components:
* What bottleneacks are limiting the performance?
* What data structures are involved?
* How parallelizable is the application?


'''cae_pers_vadd''' - contains the sample custom personality, including the software model which emulates the Application Engine FPGA
2 Evaluate Hardware Options
'''SampleAppVadd''' - contains the application that uses the instruction defined in the CasSample tree.
 
3 Define Custom Instructions
* The functions implemented by the hardware design can then be mapped to custom instructions.
4 Develop Software Model of Custom Personality
* Convey provides an architecture simulation environment to allow rapid prototyping of both the hardware and software components of a custom personality.
* This environment is written in C++ to emulate the rest of the system. It includes hardware models of instruction dispatch, register state and the memory subsystem.
5 Modify Application to Use Coprocessor
 
6 Compile Application with Convey Compiler
 
7 Simulate Application with Convey Architecture Simulator
* This step allows the application and the custom instruction set to be debugged before the hardware is designed.
[[Image:software modeling process.jpg]]
 
8 Develop FPGA Hardware
 
9 Simulate Hardware in Convey Simulation Environment
* Convey provides a hardware simulation environment with bus-functional models for all hardware interfaces to the Application Engine (AE) FPGA.
* Using a standard VPI interface (Verilog Procedural Inteface) the architecture simulator can be used to provide stimulus to the HDL simulation.
10 Integrate with Convey Hardware
 
=== Running the Sample Application ===
1. Copy Sample AE and Sample Application
The Vadd sample personality and application is installed with the PDK RPM in /opt/convey/pdk/2010_08_09/.
 
The sample is made up of two components:
* '''cae_pers_vadd''' - contains the sample custom personality, including the software model which emulates the Application Engine FPGA
** '''CaeSimPers''' - contains the AE simulation model of the sample personality
*** CaelsaVadd.cpp - models the behavior of the custom personality, implements the following functions :
**** void CCaelsa::InitPers()
**** void CCaelas::CaepInst(int masked, int ae, int opcode, int immed, unit64 scalar
** '''phys''' - Xilinx physical implementation, contains constraints files
** '''testbench'''
** '''verilog'''-RTL to be synthesized into FPGA
* '''SampleAppVadd''' - contains the application that uses the instruction defined in the CasSample tree.


  cd $HOME
  cd $HOME
  mkdir pdk_sample
  mkdir pdk_sample
  cp -r /opt/convey/pdk/2010_08_09/cae_sample_vadd pdk_sample
  cp -r /opt/convey/pdk/2010_08_09/cae_pers_vadd pdk_sample
  cp -r /opt/convey/pdk/2010_08_09/pdk_apps/SampleAppVadd pdk_sample
  cp -r /opt/convey/pdk/2010_08_09/pdk_apps/SampleAppVadd pdk_sample
2. Build the Sample AE and Sample Application
cd $HOME/pdk_sample/cae_pers_vadd/CaeSim
make
cd ../../SampleAppVadd
make
3. Custom AE Software Simulation
[[Image:software_simulation.jpg]]
* Set up Environment Variables
export CNY_PDK_PROJ=~/pdk_sample/cae_pers_vadd/
By this commend, CNY_CAE_EMULATOR will be changed into ~/pdk_sample/cae_pers_vadd/CaeSimPers/CaeSimPers
* Run the application against the architecture simulator
[[Image:result_sw_sim.jpg]]
4. Custom AE Hardware Simulation
[[Image:hardware_simulation.jpg]]
5. AE Physical Build
cd ~/pdk_sample/cae_pers_vadd/phys
make
PDK build flow automatically runs synthesis, place and route, timing analysis and bitgen

Latest revision as of 20:08, 1 February 2012

Team members

  • Michael Patterson
  • Chetan N-Govindaiah
  • Jungmin Park

Assignment 1

Developing a Custom Personality

1 Analyze Application

  • How does the current application perform on existing hardware?
  • What bottleneacks are limiting the performance?
  • What data structures are involved?
  • How parallelizable is the application?

2 Evaluate Hardware Options

3 Define Custom Instructions

  • The functions implemented by the hardware design can then be mapped to custom instructions.

4 Develop Software Model of Custom Personality

  • Convey provides an architecture simulation environment to allow rapid prototyping of both the hardware and software components of a custom personality.
  • This environment is written in C++ to emulate the rest of the system. It includes hardware models of instruction dispatch, register state and the memory subsystem.

5 Modify Application to Use Coprocessor

6 Compile Application with Convey Compiler

7 Simulate Application with Convey Architecture Simulator

  • This step allows the application and the custom instruction set to be debugged before the hardware is designed.

8 Develop FPGA Hardware

9 Simulate Hardware in Convey Simulation Environment

  • Convey provides a hardware simulation environment with bus-functional models for all hardware interfaces to the Application Engine (AE) FPGA.
  • Using a standard VPI interface (Verilog Procedural Inteface) the architecture simulator can be used to provide stimulus to the HDL simulation.

10 Integrate with Convey Hardware

Running the Sample Application

1. Copy Sample AE and Sample Application The Vadd sample personality and application is installed with the PDK RPM in /opt/convey/pdk/2010_08_09/.

The sample is made up of two components:

  • cae_pers_vadd - contains the sample custom personality, including the software model which emulates the Application Engine FPGA
    • CaeSimPers - contains the AE simulation model of the sample personality
      • CaelsaVadd.cpp - models the behavior of the custom personality, implements the following functions :
        • void CCaelsa::InitPers()
        • void CCaelas::CaepInst(int masked, int ae, int opcode, int immed, unit64 scalar
    • phys - Xilinx physical implementation, contains constraints files
    • testbench
    • verilog-RTL to be synthesized into FPGA
  • SampleAppVadd - contains the application that uses the instruction defined in the CasSample tree.
cd $HOME
mkdir pdk_sample
cp -r /opt/convey/pdk/2010_08_09/cae_pers_vadd pdk_sample
cp -r /opt/convey/pdk/2010_08_09/pdk_apps/SampleAppVadd pdk_sample

2. Build the Sample AE and Sample Application

cd $HOME/pdk_sample/cae_pers_vadd/CaeSim 
make
cd ../../SampleAppVadd
make

3. Custom AE Software Simulation

  • Set up Environment Variables
export CNY_PDK_PROJ=~/pdk_sample/cae_pers_vadd/

By this commend, CNY_CAE_EMULATOR will be changed into ~/pdk_sample/cae_pers_vadd/CaeSimPers/CaeSimPers

  • Run the application against the architecture simulator

4. Custom AE Hardware Simulation

5. AE Physical Build

cd ~/pdk_sample/cae_pers_vadd/phys
make

PDK build flow automatically runs synthesis, place and route, timing analysis and bitgen